Not everyone enjoys cleaning their bathroom walls. However, if you are conscious about your hygiene and want to have a pristine-looking bathroom then it is absolutely necessary to properly scrub down your bathroom walls. The only problem is that we often don’t know which products to use for optimal results. So how do we go about cleaning them?
To rid your bathroom shower walls of soap scum and hard water stains, vinegar, baking soda, car wax, and CLR are the quickest and most efficient means. You can also employ a steam mop but avoid using any chemical cleaners since they are harmful to you as well as your shower walls.
The sight of soap scum and mildew on shower walls can be extremely repulsive. Even if you use the correct cleaning products, there is a chance you might end up with disappointing results due to not using the correct cleaning procedure. Therefore, it’s critical to know how to use these cleaning products for optimum results.
Can You Use Vinegar To Clean the Bathroom/Shower Wall?
Vinegar is a very popular and reliable choice for wiping away hard-to-remove stains from all kinds of surfaces. However, I had never used vinegar to clean my bathroom walls before and when I finally used it I was shocked by the results.
Vinegar quickly got rid of scum and grease marks on my bathroom walls. The acidic properties of vinegar allow it to get rid of the stains very efficiently. However, make sure to not use too much vinegar as it could discolor the wall or the tiles.
How To Use Vinegar to Clean Bathroom Walls
Vinegar is an excellent, non-greasy cleaner that you can use on your shower walls. However, if you do not use it correctly, you might end up with sub-optimal results.
Step 1: Prepare the vinegar solution. Mix a half-cup of vinegar with a gallon of warm water in a bucket.
Step 2: Dip your sponge in the mixture you made and compress it to remove any excess water. Then use this sponge to wipe the stains in a circular motion with little pressure to see the results. You can also fill a spray bottle with this solution and use a microfiber cloth for the cleaning.
If the stains do not come off easily then increase the amount of vinegar in the mixture. Moreover, make sure you’re using a sponge and not any abrasive material, otherwise, you risk leaving unremovable scratches on the surface of your wall.
Step 3: Once you’re done removing the stains, don’t forget to rinse the wall with clean water. Use a new clean sponge to properly wipe away any vinegar residue left on the wall.
This article and its contents are owned by Wabi Sabi Group and was first published on 06/13/2022.
Can You Use Rain-X To Clean Bathroom/Shower Wall?
Rain-X is a common chemical cleaner that specifically targets tough watermarks on various surfaces. Despite knowing that it is mostly used on glassy surfaces, I still tried to clean my bathroom walls with Rain-X and was ultimately disappointed with the results.
Rain-X is not a great chemical cleaner for cleaning hard stains and soap scum build ups on shower walls. This thick solution requires extra effort to apply to the surfaces such as fiberglass. It only got rid of the surface dirt, which can also be done by other multipurpose cleaners.
Although the drawbacks of using Rain-X outweigh the benefits, you can still use Rain-X to clean your bathroom walls if all you want is to remove surface dirt and leave a wonderful and lasting fragrance.
|
Benefits of Rain-X |
Drawbacks of Rain-X |
|
Non-abrasive chemical cleaner |
The cleaning process is time-consuming. |
|
Leaves behind a great fragrance |
Too expensive as a standalone cleaner |
|
Good for surface dirt |
Cannot remove hard water stains |
Can You Use Car Wax To Clean Bathroom/Shower Walls?
Nobody likes having soap scum on their shower walls. Therefore, when I found out that it’s possible to use car wax to clean your shower walls, I knew I had to give it a shot. Car wax is a very versatile product and ended up giving me phenomenal results.
Car wax can clean bathroom walls as it prevents the growth of mildew and gets rid of tough stains. Make sure you wipe the walls with a microfiber cloth before applying the wax. The best thing about using car wax is that you’ll only have to apply it to your walls once or twice a year!
Making A Car Wax To Clean Shower Walls
The chances of leaving behind a glossy and stain-free surface will increase once you create your car wax at home. For that, you will require:
- Half a cup of vinegar
- One cup of linseed oil
- 2 tbsp beeswax
- 3-4 tbsp of carnauba wax
Once you’re equipped with all the necessary ingredients, it’s time to get to work!
Step 1: Gather the required products and add them all together in a saucepan. Heat and stir the mixture until all the ingredients have melted. Make sure you’re heating at a low temperature to avoid the burning of ingredients.
Step 2: Pour the mixture into a heat-resistant container and let it cool.
Step 3: Once it has cooled down, use a microfiber cloth and spread the mixture onto the surface you want to clean. Make sure to rub the wax on the shower walls with side-to-side strokes.
Step 4: After half an hour, clean the solution using water and a clean microfiber cloth. You’ll notice the soap scum and stains disappearing in no time!
This article and its contents are owned by Wabi Sabi Group and was first published on 06/13/2022.
Can You Use Baking Soda To Clean Bathroom/Shower Wall?
Baking soda is becoming incredibly famous for its cleaning capabilities. We occasionally come across its multiple uses, especially on social media, some of which include cleaning bathtubs, showerheads, and kitchen supplies. However, I’ve been wondering whether we can use baking soda to clean bathroom walls as well.
Baking soda is very effective at cleaning bathroom/shower walls. To do this, prepare a paste using 3 cups of baking soda and some water. Apply the paste straight onto the bathroom tiles and use an old toothbrush to scrub off the hard stains. Once you are done, wipe the wall with a cloth soaked in lemon juice before rinsing with warm water.
The good thing about baking soda is that it’ll leave behind a spotlessly clean wall. Make sure that you scrub each area of the wall properly so that the chemical can work its magic on the stubborn stains and grouting.
Can You Use CLR To Clean a Bathroom/Shower Wall?
Grease and soap scum can accumulate very easily on your shower walls despite your best efforts at preventing them. Therefore, you sometimes require heavy-duty cleaners such as CLR to get rid of these hard-to-remove stains.
CLR can get rid of watermarks and calcium deposits from your shower walls. CLR contains lactic acid, which is great at killing all harmful microbes and germs from your shower walls. However, make sure to wear protective gloves when you use this product.
How To Use CLR To Clean Bathroom Walls
Since CLR is a heavy-duty cleaning product, it’s important to follow the proper steps so that you can get the results you’re looking for.
Step 1: Ventilate the bathroom properly by opening the windows and turning on the exhaust fan.
Step 2: Wear protective rubber gloves and create a mixture of CLR and water. Follow the instructions provided on the CLR bottle regarding the quantities of these items.
Step 3: Once you’ve prepared your solution, go ahead and dip your sponge or microfiber cloth in the bowl and start wiping away at your shower walls. Let the mixture sit for roughly 15 minutes on the surface of your wall.
Step 4: When the time is up, properly rinse off the solution using water and a clean cloth.
Can You Use Brush To Clean Bathroom/Shower Wall?
People often get the part of using the appropriate cleaner for their bathroom wall. However, the problem arises when people don’t use the appropriate tool to clean or scrub their walls. Ideally, using a soft sponge or a microfibre cloth will do the trick, but can you also use a brush to clean your shower walls?
Do not use a brush to scrub away stubborn stains, especially on ceramic tiles. Metal scrubbers and hard-bristled brushes can damage the surface of the tiles, leaving behind permanent scratches. Instead, you should use soft-bristled brushes or a squeegee which are harmless and effective at cleaning bathroom walls.
Can You Use a Mop To Clean a Bathroom/Shower Wall?
Scrubbing your bathroom walls can be a very laborious task. No one wants to spend hours scrubbing away the hard water stains. Since sponges are often ineffective at getting rid of hard stains, people occasionally use mops to clean their shower walls. However, does it do the job effectively?
Using a sponge mop is a great way of cleaning your shower walls. Not only does it speed up the process, but it also allows you to reach higher places on the wall without having to find something to boost you up.
To make the process easier, all you need to do is create a solution using baking soda and water. Once you have made the solution, take a sponge mop and dip it into the solution. Then use the mob to wipe away the stains. If you’re using a spray cleaner, you can dampen the sponge section of the mop before you begin cleaning.
This article and its contents are owned by Wabi Sabi Group and was first published on 06/13/2022.
Can You Use Bleach To Clean Bathroom/Shower Wall?
With so many cleaning products available in the market, bleach is not as commonly used as it once was. However, that doesn’t mean it is not an effective cleaner. So can you use it to clean your bathroom walls?
Although bleach can be used to clean your shower walls, it is an extremely strong and powerful product. It can be used to effectively kill germs, brighten surfaces and eliminate foul odors. However, do not use bleach without knowing the proper procedure and without wearing rubber gloves.
How To Clean Your Shower Walls Using Bleach Correctly
Applying undiluted bleach to your shower wall will almost certainly destroy the paint. Therefore, you should use a diluted version of bleach to prevent any damage. To achieve this you mix bleach and water in a 1:3 ratio.
Fill a spray bottle with this solution and spray it on the wall. Once the wall is drenched in this solution, allow it to settle on the wall for 15 minutes. Once you’re done, wipe away the stains with a moist towel and rinse off the residue with water.
Can You Use Steam To Clean a Bathroom/Shower Wall?
Having to continuously scrub at water stains using a sponge sounds like a nightmare to most of us. Therefore, people try to look for simpler options instead. One such option is to use a steam mop. The question, however, is whether we can use steam to clean bathroom walls.
A steam mop is one of the best approaches for cleaning shower walls. One of the best things about steam mop is that it is easily portable and can reach high levels. This makes cleaning a lot simpler than manually scrubbing with a sponge. Simply keep the microfibre pad on the steamer and run the steamer over stained areas.
Step-By-Step Guide For Cleaning Shower Walls With Steam
Although steam cleaners make rapid work of what is usually a time-consuming and laborious task, you will need to follow the proper procedure to get the optimal results.
Step 1: First, clean the area where you would be applying your steam cleaner. Excessive filth or soap scum might jam the steam cleaner brush and impede the cleaning process. You can clean the walls beforehand using a sponge and a light detergent. Make sure to rinse off the detergent with water.
Step 2: Now add water to the steam cleaner and set it to steam. Use a nylon-bristle brush so that you don’t end up damaging the walls.
You can use a brass bristle brush to remove stubborn debris, but you risk damaging your tiles, especially if those tiles are made of porcelain.
Step 3: Switch on the steam and scrub away the grout with back-and-forth motions. Make sure you start at the top and work your way downwards. This will allow the water to drip onto the dirty areas below.
Step 4: Stop scrubbing at regular intervals and properly rinse each area that you have steamed with clean water. It is important to remove the unclean water on the surface of the wall so that it doesn’t settle back in. Repeat the steaming process until the work is finished.
Step 5: Lastly, clean and dry the entire wall using a clean microfiber cloth.
This content is owned by Wabi Sabi Group and was first published on Jun 13, 2022..
This article and its contents are owned by Wabi Sabi Group and was first published on 06/13/2022.
Can You Use Dawn To Clean Bathroom/Shower Wall?
I’ve frequently used Dawn dish soap to clean various surfaces, and it has always produced fantastic results. Therefore, I tried using it to clean my shower walls as well.
Dawn works best when it is mixed with white vinegar for cleaning shower walls. This mixture is very effective at getting rid of extremely tough stains on the walls. Moreover, this solution also got rid of mildew and soap scum fairly easily.
How To Clean Shower Walls Using Dawn And White Vinegar Solution
The cleaning process is quite simple and requires the use of only two products: a Dawn dish soap and vinegar. I’ve outlined the steps that I followed for cleaning my bathroom walls.
Step 1: In a clean spray bottle, mix equal parts of Dawn and white vinegar. Shake the bottle thoroughly to mix the solution.
This article was first published on Jun 13, 2022 by Wabi Sabi Group..
Step 2: Once the solution is ready, spray it as much as you want on your shower walls. Allow the solution to rest for half an hour.
Step 3: Once the wait is over, thoroughly scrub the surface with a sponge or soft-bristle brush to remove all the soap scum, hard water stains, and mildew.
Step 4: When you are done, rinse the walls with warm water and dry them using a microfibre cloth.
Step 5: Remove extra water from the bathroom walls using a squeegee or a sponge. After a few minutes, the strong vinegar odor will diminish and leave behind a spotlessly clean wall!
How To Clean Bathroom/Shower Wall Properly
It is very important to keep your bathroom walls clean. However, if you’re stuck wondering how you should properly clean your shower walls, you’re in luck. I’ve got a simple guide for you.
Gather the essential supplies, including baking soda, lemon juice, and some warm water. Create a solution using these products and scrub it over the bathroom walls. Once you are done cleaning, rinse off this solution with water and dry the wall with a clean microfiber cloth.
The Correct Way Of Cleaning Bathroom Walls
We can often end up cleaning our bathroom walls and still leave behind a host of germs, soap scum, and ugly stain marks. Therefore, it’s critical to follow the correct cleaning procedure if you’re looking for a long-lasting fix to this problem.
Begin by running a hot shower. The hot water vapors will soften the dirt and grease on your shower walls and make them easier to clean. Once you’re done, use 1/2 cup baking soda and 1/2 cup lemon juice and mix it in a bucket of warm water.
This article and its contents are owned by Wabi Sabi Group and was first published on 06/13/2022.
Mix this solution well and scrub your wall tiles with this solution using either a mop, sponge, or a microfiber cloth. After you’ve applied the solution, allow it to sit there for five to ten minutes.
Then, using a clean, wet sponge, wipe clean the surface of the walls. You can use the bathroom cleaner by Cif to effectively remove watermarks and soap residues.
Related Articles
What Can You Use to Clean Bathtubs?
What Can You Use To Clean/Unclog a Shower Drain?
What Can You Use To Clean Soap Scum?
What Can You Use To Clean a Shower Curtain?
WabiSabi Group is the owner of this article and was published on Jun 13, 2022 and last modified on .