Skip to Content

What Can You Use To Clean Soap Scum?

A photo of soap scum on the floor

Cleanliness is important to everyone, whether it is to protect oneself from foul odors or to avoid infections, which is where soap comes into play. However, soap, when combined with water, can create a soapy film surrounding your showers, sinks, and tubs, trapping body oils, dead skin, hair, and dust. So, what is the best cleaning method for removing stubborn soap scum?

The simplest method to combat soap scum is to scrub your bathroom regularly with cleaning agents like ammonia or vinegar. This will impede the accumulation of soap scum, which, if otherwise left unchecked, can harden to become a breeding ground for various bacteria.

Soap scum can be disgusting to look at initially, but it can turn into a much bigger detriment if not expelled timely. Thus, removing it is necessary so that you may properly clean yourself and your household. As such, knowing which cleaning products to use and how to utilize them will help you live a hygienic and healthy life!

Can You Use Vinegar To Clean Soap Scum?

A photo of vinegar in a bottle and in the sauce bowl

For the longest time, I have been using a famous remedy to clean my dirty countertops; vinegar. Seeing the effectiveness of this item, I wondered, if vinegar can make my countertops look new, can I use it to clean the soap scum in my bathtub?

Soap scum can be easily cleaned with vinegar. On top of being environmentally safe, cleaning vinegar has a greater acidic content that will, without a doubt, do away with hard water minerals and soap residue. With this item, you won’t have to renovate your bathroom for a long time!

Correct Method to Clean Soap Scum with Vinegar

Vinegar is known to be a decent cleaning agent, and it can be used to remove soap scum through two different methods:

Step 1: Take an empty spraying bottle.

Step 2: Fill the bottle with vinegar.

Step 3: Spray the vinegar directly onto the soap scum.

Step 4: Let it sit for a while and then wipe soapy residue.

However, if the soap scum in your washroom is tough and persistent, you will need to try another method to get rid of it altogether!

Step 1: Find an empty bottle that can be used for spraying.

Step 2: Combine equal parts of water and vinegar into the bottle.

Step 3: Add one tablespoon of dishwashing powder into the bottle and shake it thoroughly.

Step 4: Spray the mixture on the soap scum and let it for 15 minutes.

Step 5: Rub it with a soft brush and rinse it with hot water.

Can You Use White Vinegar To Clean Soap Scum?

White vinegar is a wonderful option for removing all of the filthy soap scum from your bathroom! Simply combine one cup of distilled white vinegar, one cup of water, and one tablespoon of dishwashing powder in a spray bottle and spray it into the soap scum-infested region.

This article and its contents are owned by Wabi Sabi Group and was first published on 06/23/2022.

Can You Use Apple Cider Vinegar To Clean Soap Scum?

Yes, apple cider vinegar can effectively remove soap scum from any surface. All you need to do is mix one-fourth cup baking soda, 1 to 2 teaspoons Castile soap, and a dash of apple cider vinegar together. Moreover, if you are sensitive to the strong odors of vinegar, you can add a few drops of essential oil into the mix before use.

Can You Use Dawn/Dish Soap To Clean Soap Scum?

A photo of dishwashing liquid in a container with sponge

When I think of a cleaning agent, I immediately think of dish soap because it is the conventional approach to cleaning dirty everyday dishes. With a bottle of dish soap sitting in my kitchen, I pondered whether or not this widely accessible cleaning agent can also clean soap scum?

Why not! Soap scum can be easily scrubbed off with any dish soap, such as dawn, as they are chemically designed to eliminate germs. However, since soap scum is more difficult to remove than residual food or grease, you must apply the proper approach to clean soap scum with dawn/dish soap.

The Proper Way To Clean Soap Scum With Dawn / Dish Soap

While dish soap is effective on soap scum, you need to follow the correct method to make the most of it!

Step 1: Find a 32-ounce bottle that you can spray with.

Step 2: Carefully add one cup of Dawn dish soap into the bottle.

Step 3: Fill the rest of the bottle with water and shake it gently to mix the components.

Step 4: Sprinkle the solution generously on the area to be cleaned.

Step 5: Allow it to rest for at least 30 minutes overnight.

Step 6: Scrub the soap scum-affected surface with a brush or sponge.

Step 7: Rinse it properly and let the area air dry.

Can You Use Borax To Clean Soap Scum?

A photo of a kid thinking

Whether it is cleaning your dirty couch, getting a stubborn stain off your shirt, or wiping your dirty mirror, Borax is ideal for the job. Given the versatility of Borax, it should be able to remove soap scum as well, right?

You can definitely use Borax to clean soap scum. It is excellent for removing soap scum from bathtubs, mirrors, and other soap scum-infested surfaces. When borax is combined with water (particularly hot water), it produces hydrogen peroxide, which is capable of removing the soapy residue. Although, take care when using borax as it can irritate your eyes and nose.

The Correct Way To Clean Soap Scum With Borax

Given that borax can have discomforting effects if mishandled, here are the proper steps you should to ensure flawless cleaning:

Step 1: Take an empty spray bottle.

Step 2: Add a quarter to half cup of Borax into it.

Step 3: Pour two cups of water and gently shake it.

Step 4: Excessively spray the solution onto the soap scum.

Step 5: Let it rest for fifteen minutes and then gently scrub off the soap scum.

This is a one-time solution for cleaning soap scum. That’s because if the borax is kept in the spray container, it will eventually solidify and become ineffective for clearing soap scum.

This article and its contents are owned by Wabi Sabi Group and was first published on 06/23/2022.

Can You Use Coke To Clean Soap Scum?

A person's hand holding coca-cola

After seeing countless videos of individuals cleaning their rusted equipment with coke, I wondered whether this powerful liquid can work its magic on soap scum and make your bathroom appear brand new?

Coke can be used to scrub the soapy scum off your bathroom surface! Coke is high in sugar, yet its acidity allows it to cut through filth, dirt, and rust, making it ideal for cleaning soap scum! However, as coke contains less phosphoric acid than other cleaning agents, you must use it correctly to be successful.

Step-By-Step Guide On Using Coke To Clean Soap Scum

The good thing about Coke is that it’s widely available and easily affordable. Once you get your hands on one, all you need to make sure is to follow the right steps to utilize it properly. The method is really easy to follow:

Step 1: Get a small empty spraying bottle.

Step 2: Fill it with coke.

Step 3: Spray the bottle onto the soap scum till you are satisfied.

Step 4: Leave the coke-soaked soapy residue for at least 30 minutes.

Step 5: Gently scrub the soap scum and rinse it with hot water.

Can You Use Hydrogen Peroxide To Clean Soap Scum?

Scientifically speaking, hydrogen peroxide has been proven to be a strong disinfectant, making it a good cleaning agent in many cases. This begs the question of whether or not it’s good enough for cleaning soap scum.

Yes, you can use Hydrogen Peroxide to clear off soap scum. On top of being a strong cleaning agent against soap scum, it is a safer and cheaper alternative to commercial cleaners that may include harmful toxins or fumes. Don’t forget to use it sparingly as higher doses of hydrogen peroxide can cause severe burns and sores, so use it with caution.

How To Safely Use Hydrogen Peroxide To Clean Soap Scum?

While hydrogen peroxide is a good cleaning agent, one should be careful not to mishandle it as it can be detrimental to your skin. Thus, there is a safe process to follow that will keep you safe and provide satisfying results.

Step 1: Grab a small bowl.

Step 2: Mix one part of hydrogen peroxide with two parts of baking soda.

Step 3: Gently apply the paste to the soap scum-infected areas with a spoon.

Step 4: Allow it to sit for at least 30 minutes.

Step 5: Scrub the infected area with a towel or sponge.

Step 6: Rinse it and let it air dry.

If you have sensitive skin, consider wearing gloves when handling hydrogen peroxide. Moreover, as peroxide’s chemical composition decays if exposed to light, keep it in a dark brown bottle.

Can You Use Lemon Juice To Clean Soap Scum?

Due to how easily accessible lemon is, it is said to be an efficient trick for removing grease and food residue from unclean dishes. Keeping that in mind, is it possible to use this hack to clean soap scum and get the same results as with dirty dishes?

Lemon juice’s acidic nature makes it the ideal cleaning agent for removing tough soap scums from your bathroom! Lemon is a better substitute for chemical detergents and cleaners since it is natural and devoid of toxins. There is, however, a specialized technique to utilize lemon in removing any undesired soapy residue.

A Proper Guide To Using Lemon Juice To Clean Soap Scum

You may choose between two techniques for removing soap scum with lemon juice, depending on your preferences and needs.

Step 1: Get a bottle of lemon juice.

Step 2: Sprinkle the lemon juice on a cloth or sponge.

Step 3: Wipe the sponge over the soap scum.

Step 4: Let it sit for a few minutes.

Step 5: Clean the soap scum with hot water.

However, if you have stubborn soap scum that will be hard to clean, the following method will suit you more.

Step 1: Find a spray bottle.

Step 2: Pour white vinegar and water into equal parts.

Step 3: Add several drops of lemon juice and shake the mixture well.

Step 4: Drench the area you wish to clean in this solution.

Step 5: Leave for a few minutes and use a soft brush or sponge to clean the soap scum.

Step 6: Thoroughly rinse the area with water to remove any bacteria or germs.

Can You Use Steam To Clean Soap Scum?

Steam can definitely be used to remove soap scum off most surfaces. The strength of superheated steam combined with the high pressure at which it is emitted may quickly dissolve and remove even stubborn soap scum off a wide range of materials.

Step-by-Step Guide To Clean Soap Scum With Steam

When it comes to cleaning glass surfaces, steam is a great substitute for conventional cleaners. However, glass surfaces and soap scums are not the same since soap scums are difficult to remove, which is why it is important to use the correct method.

Step 1: Get a steam gun or machine.

Step 2: Set the steam machine to the optimal temperature of between 120 and 160 °F.

Step 3: Spritz the places where soap scum has collected.

Step 4: Move the steam machine frequently to make sure all of the soap scum is removed.

Can You Use Baking Soda To Clean Soap Scum?

Whether I need to whiten my teeth or clean my rusty steel dishes, baking soda is used for everything. If baking soda is such a famous cleaning agent, can it also be used to clean tough and hardened soap scum?

Baking soda can successfully remove soap scum since it is a mild alkali that removes dirt and grease when coupled with water. However, due to the material’s uncertain effectiveness as a cleaning agent, it’s normally suggested to dilute it with dishwashing detergent for removing soap scum.

This article and its contents are owned by Wabi Sabi Group and was first published on 06/23/2022.

Steps To Clean Soap Scum With Baking Soda

Baking soda is well-known for its cleaning properties, but it must be used in a certain manner to clean soap scum specifically.

Step 1: Grab a small bowl.

This content is owned by Wabi Sabi Group and was first published on Jun 23, 2022..

Step 2: To make a relatively thin paste, combine half a cup of baking soda, one small splash of dishwashing soap, and one cup of water.

Step 3: Apply the solution with a brush and let it sit for about 20 minutes.

Step 4: Wipe the infected area with a microfibre cloth and rinse it.

Can You Use Bleach To Clean Soap Scum?

Whenever I want to make my clothing smoother and cleaner, I use some diluted bleach, and it works flawlessly. Can it, however, be used to remove soap scum from my bathroom?

Due to its acidic properties, Bleach can effectively remove soap scum and also help clean your bathroom. Be careful not to use excess, as it can potentially burn your skin – thus, it’s generally recommended to follow the correct procedure to avoid mishandling it.

Correct Method To Clean Soap Scum With Bleach

With this method, you may bid farewell to unpleasant soap scum and welcome a spotless bathroom.

Step 1: Find a small bottle that you can spray with.

Step 2: Fill it with water-diluted bleach or Clorox.

Step 3: Spray it on the soap scum.

Step 4: Wait for ten minutes and then rinse with water.

Can You Use Bar Keeper’s Friend To Clean Soap Scum?

Bar Keeper’s Friend is a commercial cleaning agent that can be used to clean everything, from floor tiles to dusty tables. However, does it show the same level of efficiency when used to clean soap scum?

Definitely, Bar Keeper’s Friend can effectively eliminate soap scum and clean your bathroom in the process. Bar Keepers Friend Cleanser is also a far better choice than conventional cleaners since it is completely non-toxic and suitable for applying on most surfaces.

The Right Method To Clean Soap Scum With Bar Keeper’s Friend

Are you ready to discover how to clear soap scum with Bar Keeper’s Friend? I have some advice for you.

Step 1: Wet the soap scum.

Step 2: Apply Bar Keeper’s Friend on a cloth and rub it.

This article was first published on Jun 23, 2022 by Wabi Sabi Group..

Step 3: Leave it for one minute and then rinse it.

Can You Use Norwex To Clean Soap Scum?

Norwex is effective at removing soap scums. All you have to do is spray Norwex Descaler on the soap scum, wait twenty minutes, and then wipe it well. You will be pleased with the outcome!

Can You Use Lime Away To Clean Soap Scum?

Lime Away offers a quick solution to get rid of soap scum. Its exclusive Turbo Power cleaning chemicals can remove nasty soap scum from any surface! Simply spray it on the soap scum and rinse it away.

How To Clean Soap Scum Properly?

If you’ve tried all of the cures that others have suggested to get rid of soap scum but it’s still troubling you, you may ask yourself what is the proper way to clean soap scum?

In addition to the multiple choices listed above, grapefruit, corn starch, and essential oil can also be a fix to your problem! All of which are free of toxins and dangerous chemicals making them safe to use.

Simply apply these solutions over the soap scum you wish to eliminate and let it sit for a couple of minutes. Once the soap scum has softened up, you can wipe it with the help of a soft cloth and rinse the surface to remove any residue of your cleaning agent and the soap.

Related Articles

What Can You Use To Clean Bathroom Sink/Drain

What Eco-Friendly Cleaner Can You Use To Clean Toilet?

What Can You Use to Clean Bathtubs?

What Can You Use To Clean Bathroom/Shower Walls?

WabiSabi Group is the owner of this article and was published on Jun 23, 2022 and last modified on .

What Can You Use To Clean/Unclog a Shower Drain?